4800 series dual winding surface mount inductors features 1.0? to 400? 1 up to 12.3a idc bobbin format dual winding surface mounting integral emi shield compact size t ape and reel packaging description the 4800 series is a range of dual wound inductors offering flexible options. windings can be connected in series or parallel to create a wide range of inductance combinations. they can also be used as common mode chokes or 1:1 transformers with the secondary winding used as a feedback winding in switched mode power supplies. 1w hen connecting windings in series, inductance will be 4 times the nominal figure shown. 2 specifications typical at ta=25? 3i f current is flowing in both windings the maximum dc current occurs when either the inductance falls to 85% of its nominal value or when its temperature rise reaches 40?, whichever is sooner. mechanical dimensions selection guide 2 nominal inductance dc current dc inductance 1 range continuous 3 resistance ? ? a max m ? 10khz,100mv 10khz, 100mv 1&2 s/c to max order code 1&3, 2&4 1&3, 2&4 3&4 s/c 1&3, 2&4 481R0 1.0 0.66 - 1.11 12.3 9.00 482r2 2.2 1.64 - 2.73 8.30 13.5 483r3 3.3 2.29 - 3.82 6.80 19.1 484r7 4.7 4.18 - 6.27 5.70 29.4 486r8 6.8 5.22 - 7.83 4.70 39.9 48100 10 7.65 - 11.5 3.90 61.4 48150 15 12.2 - 18.2 3.20 77.4 48220 22 17.7 - 26.6 2.60 119 48330 33 26.7 - 40.1 2.10 184 48470 47 37.6 - 56.4 1.80 274 48680 68 53.8 - 80.7 1.50 409 48101 100 81.3 - 122 1.23 503 0.480?.30 (12.20?.012) 0.480 ?.30 (12.20 ?.012) 2 1 3 4 0.244(6.20) max 0.591(15.0) 0.197(5.00) all dimensions in inches (mm) absolute maximum ratings operating free air temperature range ?0? to 85? storage temperature range 40? to 125? pin connections (top view) 1 2 3 & 1 = primary winding 4 & 2 = secondary winding 4 3 www.cdpoweronline.com 0.039(1.00) 0.197 (5.00) recommended footprint details p ackage details order code typ weight (g) packaging style 48xxx 3.1 tape & reel order reel reel outline dimensions code quantity n w1 w2 w3 48xxx 600 2.362 0.961 1.197 0.914-1.079 ( 60.0) (24.4) (30.4) (23.9-27 .4) all dimensions in inches(mm). controlling dimension in mm. reel dimensions (see fig.1) t ape and reel specifications shall conform with standards iec 60286-3 & eia-481-c peel force and speed of cover tape; 0.1-1.3n @300?0mm/min, the angle between the cover tape during peel-off and the direction of unreeling shall be 165-180? the break force of the cover tape shall be 10n min. the carrier tape leader section shall include a minimum 100mm length of empty carrier tape sealed by the cover tape (see fig.1). the maximum number of missing components shall be one or 0.1%, whichever is greater. in no case shall there be two or more consecutive components missing. the trailer section shall consist entirely of empty carrier tape sealed by the cover tape. the carrier tape shall be released from the reel hub as the last portion of the carrier tape unwinds from the reel. sprocket hole pitch tolerance over any 10 pitches ?.2mm. carrier tape camber shall not exceed 1mm/250mm in either direction. t ape & reel specifications order tape outline dimensions code a0 b0 e2 f k0 p1 w 48xxx 0.496 0.496 0.876 0.453 0.252 0.630 0.945 (12.6) (12.6) (22.3) (11.5) (6.4) (16.0) (24.0) all dimensions in inches(mm). controlling dimension in mm. t ape dimensions (see fig.2)
c&d technologies (ncl) limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. ?c&d technologies (ncl) limited 2004 nmp 4800.1 no part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from c&d technologies (ncl) limited. instructions for use are available from: www.cdpoweronline.com 4800 series dual winding surface mount inductors 1w hen connecting windings in series, inductance will be 4 times the nominal figure shown. 2 specifications typical at ta=25? 3i f current is flowing in both windings the maximum dc current occurs when either the inductance falls to 85% of its nominal value or when its temperature rise reaches 40?, whichever is sooner. fig.1 reel - outline dimensions fig.2 tape - outline dimensions c&d technologies (ncl) ltd tann ers drive, blakelands north milton keynes mk14 5bu, england te l: +44 (0)1908 615232 fax: +44 (0)1908 617545 email: info@cdtechno-ncl.com c&d technologies inc. 3400 e britannia drive, tucson, arizona 85706, usa te l: +1 (800) 547-2537 fax: +1 (520) 741-4598 email: sales@cdtechno.com www.cdpoweronline.com
|
